Wireless Glove Integrity Tester

Wireless Glove Leak Tester Detector is designed for detection of fractures on protective gloves that used in pharmaceutical and laboratories. Working principle of the equipment is injecting compressed air into the gloves, and stopping the air injection when pressure reaches a preset value. Fractures of gloves can be detected by observing whether the pressure in the gloves has changed over time.

Sterile Plus WGIT,The most Advanced and fully automated glove leak testing systemwith pressure decay measurement for isolators and RABS in the pharmaceutical industry. The Operation is simple without tubes and wires.All necessary functions to perform a reliable glove test are integrated in the battery powerd test cover. The Method is monitoring the pressure loss of the glove/Sleeve assembly over a defined time. The system performs pressure decay integrity tests that comply with the requirements of ISO 14644-7 AnnexE.5


Built in power system with no external power supply.

21 CFR Part 11 compliance.

Built in gas supply system without external gas source.

Built-in remaining capacity control system and avoid from unfinished testing of gloves.

Human-computer interaction interface, gloves number, online display test data.

Wireless communication, wireless remote(within 20m), and instant printing testing data and results through printers.

Rapid air inflation; test period of every glove is 3min/each glove; 10 gloves are tested continuously.

The rechargeable system ensures repeated use of the equipment.

Wireless Glove Integrity Tester


Glove Port Size

8 inch 10 Inch 12 inch /Customize


Buit in Li-ion-Battery Fully charge takes 1hr.30min. and 80% charge take 40 min, one complete charge machine can test 15 ports


ABS & Polycarbonate



In-Built Memory

Can Store more than 100 reports


500 Pa


1000 Pa

Wireless Printer


Validation file


Min test time

7 min

Air Source

ln-Buit High standard vacuum pump



Minimum readable pressure

0.1 Pa

Testing Type

lnsite and offline